The CAMO Edge Deck Clips is a fast, easy, versatile and strong clip installation for grooved decking. It is warranted for use in leading grooved wood, capped composite and PVC decking products including Trex, TimberTech, AZEK, Fiberon, Deckorators, Veranda, TROPICS, and ChoiceDek

The CAMO EDGEX Clips install into grooved decking boards for a fast, easy, versatile, and strong installation. The clip hugs the groove in the deck board so no partial installation is required and multiple boards can be set before driving the screws. Has 88% more holding strength than other clips on the market. For use in leading wood, capped composite and PVC decking products. Warranted for use with Trex, TimberTech, AZEK, Fiberon, Deckorators, Veranda, TROPICS, and ChoiceDek.

EDGEfast Hidden Fastener Decking System

EDGEfast EF2.25SS Fasteners

EDGEfast EF2.25EC Fasteners

FASTENER EXPRESS | HIDfast Hidden Fastener Decking System

FASTENER EXPRESS | HIDfast Grooved Board Attachment

Fastener Express Inc., | HIDfast HF2.5 Fasteners

FASTENER EXPRESS | HIDfast HF3 Fasteners

FASTENER EXPRESS | HIDfast HF3M Fasteners

FASTENER EXPRESS | HIDfast HF3W Fasteners

Fasco I-Clip Invisideck Hidden Scrail Clips, 900 Per Bucket

Fasco SCPS413FPFCB 1-1/2-Inch 113 Fascoat InvisiDeck Scrail Fasteners

GRK FIN/TRIM Head ProPak 8 by 2 1/2" Finishing Screws, 605 per Pail

GRK FIN/TRIM Head ProPak 8 by 2" Finishing Screws, 725 per Pail

GRK FIN/TRIM Head ProPak 9 by 3 1/8" Finishing Screws, 348 per Pail

FASTENER EXPRESS | Quik Drive DTHQ212S Trim Head Screw for Deck and Dock 2 1/2-Inch with Quik Guard Corrosion Protection

FlatLOK is a multi purpose structural wood-to-wood fastener that is an alternative fastening method to using nails and through bolts when attaching multi-ply LVL, dimensional beams and girder trusses. The flat head sits flush, allowing for easy application of drywall or trim.

Description: • Multi-purpose structural wood screws for fastening multi-ply LVL & girder trusses • Flat head allows for easy finishing including drywall or trim • Approved for single-sided installation • Features a TORX® ttap® drive system that maximizes bit fit, reducing stripping potential

Fastenmaster, 250 pack, 5 inch Ledgerlok screw, engineered to attach a double ledger board to a house without pre-drilling, the Ledgerlok replaced a 1/2 inch lag, ibc/irc code compliant, esr #1078 ACQ approved.

LedgerLOK replaces lag screws and through-bolts, has been coated with a proprietary three-step coating process that protects against corrosion (even in pressure treated wood) and is ACQ approved. All LedgerLOKs will not to rust or corrode for the life of the project. The fasteners have also been tested and approved for use in ACQ including contact treatment levels. LedgerLOKs are not recommended for saltwater applications..