*FASTENERS*

Package Quantity 175 3" with ("1/8") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available. Call for details. PLEASE NOTE: THE HF2.5 FASTENERS HAVE CHANGED TO THE CODE ABOVE. THEY ARE NO LONGER AVAILABLE IN 2 1/2" LEG.

Package Quantity 175 3" with ("3/16") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available. Call for details.

Package Quantity 175 2 3/4" fasteners for use in the HIDfast Decking Tool on Tongue & Groove decking projects Other sized fasteners also available. Call for details.

Package Quantity 175 2-1/2" with ("1/4") gap fasteners for use in the HIDfast Decking Tool. Other sized fasteners also available. Call for details.

Package Quantity 350 2 1/4" Stainless Steel Fasteners for use in the EDGEfast Decking Tool.

Package Quantity 350 2 1/4" EDGEcoat (ACQ Approved) Fasteners for use in the EDGEfast Decking Tool.

Use with Fasco 11356F Tool or Tiger Claw F-5899-igun •Use with Fasco I-Clip or •930 Scrail fasteners per box covers approximately 500 square of decking •Fastener needed at every intersection of joist and deck board •InvisiDeck system automatically creates 3/16-Inch space between each deck board Fasco SCPS413FPFCB Hidden Scrail Fastener for installing grooved deck material. Works with Fasco 11365F tool or Tiger Claw F-5899-igun and Fasco I-Clips. 1 box contains 930 scrails that will cover approximately 500 square feet of grooved decking. Fasco SlotCutter can be used to create appropriate groove. Fasteners can be backed out like traditional screws.

Fasco I-Clip for InvisiDeck Hidden Scrail System. Use with Scrail SCPS413FPFCB fastener for the installation of high end decks. 900 I-Clips per box covers approximately 500 square feet of deck. Use with Fasco 11356F Tool or Tiger Claw F-5899 •Use with SCPS413FPFCB Scrail fastener •900 I-Clips covers approximately 500 square feet of decking •Cuts installation time in half •Non-Magnetic Annealed Stainless Steel

Nationally code compliant ESR #1078 Head-stamped for easy code inspection Built in washer hex-head design eliminates the need for additional washers Costs significantly less per piece than 1/2 inch galvanized lags and washers Guaranteed corrosion resistance for the life of the project; ACQ approved Fastenmaster, 12 Pack, 3-5/8", Ledgerlok Screw, Ledgerlok Is Engineered To Attach The Ledger Board To The Rim Board Of A House Without Pre-Drilling, IBC/IRC Code Compliant ESR #1078, ACQ Approved.

Use GRK Bit T-25 Self-Tapping W-cut thread design Zip-Tip Patented Climatek coating Lag Screw Alternative GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative.

#8 trim screws use bit T-10; #9 trim screws use bit T-15 Self-tapping, TRIM head screws; W-Cut thread design One pail contains 348 screws Climatek coated for all weather corrosion protection conforms with ICC#2442 TRIM head screw for any fine woodwork or carpentry application GRK TRIM Head Screws have the smallest screw head available and work great for most fine carpentry applications. Most material splitting is prevented because of the TRIM Head screw's exceptionally small head and the W-Cut thread design. The RT screws include a reverse threading under the head of the fastener. GRK has found that the reverse thread helps the screw head disappear beneath the surface of the classic wood composite material, reducing or eliminating the dimple that sometimes appears.

#8 trim screws use bit T-10; #9 trim screws use bit T-15 Self-tapping, TRIM head screws; W-Cut thread design One pail contains 348 screws Climatek coated for all weather corrosion protection conforms with ICC#2442 TRIM head screw for any fine woodwork or carpentry application GRK TRIM Head Screws have the smallest screw head available and work great for most fine carpentry applications. Most material splitting is prevented because of the TRIM Head screw's exceptionally small head and the W-Cut thread design. The RT screws include a reverse threading under the head of the fastener. GRK has found that the reverse thread helps the screw head disappear beneath the surface of the classic wood composite material, reducing or eliminating the dimple that sometimes appears.

#8 trim screws use bit T-10; #9 trim screws use bit T-15 Self-tapping, TRIM head screws; W-Cut thread design One pail contains 348 screws Climatek coated for all weather corrosion protection conforms with ICC#2442 TRIM head screw for any fine woodwork or carpentry application GRK TRIM Head Screws have the smallest screw head available and work great for most fine carpentry applications. Most material splitting is prevented because of the TRIM Head screw's exceptionally small head and the W-Cut thread design. The RT screws include a reverse threading under the head of the fastener. GRK has found that the reverse thread helps the screw head disappear beneath the surface of the classic wood composite material, reducing or eliminating the dimple that sometimes appears.

#8 trim screws use bit T-10; #9 trim screws use bit T-15 Self-tapping, TRIM head screws; W-Cut thread design One pail contains 348 screws Climatek coated for all weather corrosion protection conforms with ICC#2442 TRIM head screw for any fine woodwork or carpentry application GRK TRIM Head Screws have the smallest screw head available and work great for most fine carpentry applications. Most material splitting is prevented because of the TRIM Head screw's exceptionally small head and the W-Cut thread design. The RT screws include a reverse threading under the head of the fastener. GRK has found that the reverse thread helps the screw head disappear beneath the surface of the classic wood composite material, reducing or eliminating the dimple that sometimes appears.

Use GKR Bit T-20 Self-Tapping with fiber trapping rings W-Cut Thread Design with Zip-Tip Patented Climatek coating Composite and PVC deck screw GRK Kameleon Composite Deck Screws are an excellent choice for composite and PVC decking. The underhead has saw-blade like cutting teeth that cut a perfectly clean hole into the decking. The Kameleon also features five to seven rings that have three identical fiber traps on each ring designed to trap fibers and eliminate the mushroom effect. The CEE Thread feature enlarges the screw hole allowing the composite decking to settle easily, increases the screw's drawing strength and reduces the friction on the screw shank. The Kameleon screw comes in six colors: Grey, Sage, Sand, Tan, Brown and Redwood. SPECIFY WHICH COLOR YOU WANT IN THE "ADDITIONAL INSTRUCTIONS" TAB WHEN YOU CHECKOUT.

Use GKR Bit T-20 Self-Tapping with fiber trapping rings W-Cut Thread Design with Zip-Tip Patented Climatek coating Composite and PVC deck screw GRK Kameleon Composite Deck Screws are an excellent choice for composite and PVC decking. The underhead has saw-blade like cutting teeth that cut a perfectly clean hole into the decking. The Kameleon also features five to seven rings that have three identical fiber traps on each ring designed to trap fibers and eliminate the mushroom effect. The CEE Thread feature enlarges the screw hole allowing the composite decking to settle easily, increases the screw's drawing strength and reduces the friction on the screw shank. The Kameleon screw comes in six colors: Grey, Sage, Sand, Tan, Brown and Redwood. SPECIFY WHICH COLOR YOU WANT IN THE "ADDITIONAL INSTRUCTIONS" TAB WHEN YOU CHECKOUT.

Use GKR Bit T-20 Self-Tapping with fiber trapping rings W-Cut Thread Design with Zip-Tip Patented Climatek coating Composite and PVC deck screw GRK Kameleon Composite Deck Screws are an excellent choice for composite and PVC decking. The underhead has saw-blade like cutting teeth that cut a perfectly clean hole into the decking. The Kameleon also features five to seven rings that have three identical fiber traps on each ring designed to trap fibers and eliminate the mushroom effect. The CEE Thread feature enlarges the screw hole allowing the composite decking to settle easily, increases the screw's drawing strength and reduces the friction on the screw shank. The Kameleon screw comes in six colors: Grey, Sage, Sand, Tan, Brown and Redwood. SPECIFY WHICH COLOR YOU WANT IN THE "ADDITIONAL INSTRUCTIONS" TAB WHEN YOU CHECKOUT.

Use GRK Bit T-25 Self-Tapping W-cut thread design Zip-Tip Patented Climatek coating Lag Screw Alternative GRK RSS Rugged Structural Screw has a patented design and made of specially hardened steel to provide customers with high tensile, torque and shear strength. The sharp threads and points bite instantly into material, including hardwood, reducing the splitting effect due to smaller shanks. The GRK RSS series screws that are 3-1/8-Inch and longer have six CEE threads which enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increases the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can lower the driving torque and reduce splitting. The round head with built-in washer type head shield does not have any sharp edges like conventional lag screws. The added shoulder underneath the washer has the ability to center the RSS screw in pre-drilled hardware like hinges and connector plates. The RSS screws can be used as a lag screw alternative.

Quik Drive WSNTL134S Collated sharp point 1 3/4-inch wood screw in wire size #8 with Twin Threads and nibs under the head for easier countersinking. Flat head with #3 undersized square drive head. (uses BIT3SU bit). Used in Quik Drive Tools; PRO200, PRO200S, PRO250, PRO300S, 2000SDS. 2000 screws per box

Coarse threads with type 17 point Quik Guard proprietary double barrier corrosion protection Nibs under head for countersinking Used in Quik Drive Tools PRO250, PRO300S, 2000 SDS. Free Bit in every box of screws #2 Undersized square drive BIT2SU Quik Drive DTHQ212S Trim Head Screw for Deck and Dock 2 1/2-inch with Quik Guard Corrosion Protection. Collated sharp point screw in wire size #8 with type 17 point and nibs under the head for easier countersinking in composite decking. Trim head with #2 undersized square drive head. (uses BIT2SU bit). Used in Quik Drive Tools; PRO250, PRO300S, 2000SDS. 1500 screws per box. QuikDrive DTHQ212S #8 x 2-1/2" Trim Head Deck Screw (1500) #8 Deck/Dock Wood / Composite Decking-to-WoodFeatures: * #2 Undersized square drive - BIT2SU * Coarse threads * Nibs under the head for easier countersinking * Type 17 point * Trim head * Quik Guard coating * Curved collation

Twin Threads for Faster Driving N2000 Mechanically Galvanized Corrosion Protection Nibs under head for countersinking Used in Quik Drive Tools PRO250, PRO300S, 2000 SDS. Free Bit in every box of screws #3 Undersized square drive BIT3SU Quik Drive WSNTLG212S Deck and Dock 2 1/2-inch Screws with N2000 Corrosion Protection. Collated sharp point screw in wire size #8 with Twin Threads and nibs under the head for easier countersinking. Flat head with #3 undersized square drive head. (uses BIT3SU bit). Used in Quik Drive Tools; PRO250, PRO300S, 2000SDS. 1500 screws per box.

Quik Guard proprietary double barrier corrosion protection Composite Deck to Wood Screw Cap Head prevents "mushrooming" Used in Quik Drive Tools PRO250, PRO300S, 2000 SDS. Free Bit in every box of screws #2 Undersized square drive BIT2SU Quik Drive DCLT212S Composi-Lok (for Composite Decks) Tan Color 2 1/2-inch Deck and Dock Screws with Quik Guard Corrosion Protection. Sharp point with wire size #9 and #2 undersized square drive head (uses BIT2SU). Wings clear excess material in composite decks as Cap Head prevents -inchmushrooming-inch decking material. Used in Quik Drive tools; PRO250, PRO300S, 2000SDS. 1000 screws per box. QuikDrive DCLT212S #9 x 2-1/2" Tan Composi-Lok Deck Screws (1000) Composi-LokTM, Deck/Dock Composite Decking-to-WoodFeatures: * #2 Undersized square drive - BIT2SU * #9 Diameter * Sharp point * Cap head * Quik Guard coating * Available in RED, TAN, GREY and BROWN and 305 stainless steel * Curved collation. SPECIFY WHICH COLOR YOU WANT IN THE "ADDITIONAL INSTRUCTIONS" TAB WHEN YOU CHECKOUT.

Twin Threads for Faster Driving N2000 Mechanically Galvanized Corrosion Protection Nibs under head for countersinking Used in Quik Drive Tools PRO200, PRO200S, PRO250, PRO300S, 2000 SDS. Free Bit in every box of screws #3 Undersized square drive BIT3SU Quik Drive WSNTLG2S Deck and Dock 2-inch Screws with N2000 Corrosion Protection. Collated sharp point screw in wire size #8 with Twin Threads and nibs under the head for easier countersinking. Flat head with #3 undersized square drive head. (uses BIT3SU bit). Used in Quik Drive Tools; PRO200, PRO200S, PRO250, PRO300S, 2000SDS. 2000 screws per box

Nationally code compliant ESR #1078 Head-stamped for easy code inspection Built in washer hex-head design eliminates the need for additional washers Costs significantly less per piece than 1/2 inch galvanized lags and washers Guaranteed corrosion resistance for the life of the project; ACQ approved LEDGERLOK(R) LEDGER BOARD FASTENER - No pre-drilling ledger board fastener screws ~ Faster easier stronger than 1/2" lag screws ~ Built-in washer head design eliminates need- ~ for additional washer ~ Super-sized threads for increased holding power ~ Guaranteed corrosion resistance - ACQ approved ~ IBC/IRC code compliant - ESR#1078 ~ Free 5/16" driver bit in every package