*HOME / SPECIALS*

Introducing the newest tool to the HIDfast Family. EDGEfast. Place it once and shoot it twice. Comes with gap spacer plates that easily install onto the tool in under a minute. Gap spacer plates are 0",1/8",3/16" & 1/4". Tool holds 4 clips of 25 fasteners each. Please visit www.hidfast.com for installation information.

With the HIDfast Decker, you can stay on your feet and install boards quickly. You can install 8 deck boards in just 3 minutes. 100 sq. ft. = 10 minutes Directions: Place two 25 peice clips into HIDfast Decker. Place the Decker at the edge of deck board at each joist and lightly strike rubber trigger cap on Decker tool. ONe fastener per joist. Hammer the next deck board onto the short point of the fastener. For use with square edge, single or double groove and double groove. Designed for AZEK DECKING but may also be used with the following deckign types: •Square edge: Azek decking, cedar, cypress, fir, mahogany, redwood, purewood or other thermally modifed decking •Single or double groove: Cedar, cypress, fir, mahogany, redwood, purewood or other thermally modified decking, pvc decking •Double groove: Batu, garapa gold, IPE, Teak and similar wood types, composite decking Use HF2.5 or HF3 fasteners. For composite decking use only HF2.5. All grooved boards require the use of tool attachment #1000016 NOTE: MUST USE HIDfast NAILS. SINGLE PACK CONTAINS 175 STAINLESS STEEL FASTENERS. NOT INCLUDED. Additional Information Package Quantity contains: 1 pneumatic gun, 1 hammer tool, 1 safety glasses, 1 bottle lubrication For more information and video of how HIDfast works please visit the "Featured Products" page at www.fastenerexpressinc.com

The SN883CH34 strip SuperFramer shoots a wide range of fasteners from 2-Inch by 0.113-Inch to 3-1/4-Inch by 0.131-Inch 34-Degree paper collated nails. The SN883CH34 features our patented maintenance free end cap filter, weighs only 6.8-Pound, comfortable rubber grip, reduced recoil engineering system, pointy teeth on contact arm, trigger lock lever and our anti double fire trigger mechanism (US patent 5597106). The tool can be contact or single fire with no adjusents to the tool pull trigger then depress contact arm and the tool will contact fire to single fire first depress contact arm then pull and hold trigger tool cannot fire second nail until trigger is released and tool can cycle.

Hitachi N5008AC2 7/16" Standard Crown Stapler technology is the common thread behind the Hitachi brand. It's what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products.Hitachi N5008AC2 7/16" Standard Crown Stapler Features:; 4.4lbs lightweight and well-balanced for easy maneuverability ; Drives 16-Gauge 7/16" crown staples from 1 in. to 2 in. in length. This is a factory reconditioned tool with a 1 year factory warranty.

Technical Details The original Titanium framing hammer Less recoil shock than steel hammers Lightweight titanium head eases fatigue, yet the driving force equals a 24 -ounce steel Magnetic nail start feature on nose of the hammer for easy one-handed nail sets Ergonomic American hickory curved handles for greater swing leverage

Package Quantity 350 2 1/4" EDGEcoat (ACQ Approved) Fasteners for use in the EDGEfast Decking Tool.

Package Quantity 350 2 1/4" Stainless Steel Fasteners for use in the EDGEfast Decking Tool.

The NV45AB2 features a side-loading magazine that accepts 120 7/8-inch to 1-3/4-inch-long coiled wire collation nails with 0.120-inch diameters. The air inlet is 3/8 inch, and the ideal operating air pressure is 70-120 psi. The Hitachi NV45AB2 1-3/4-Inch Coil Roofing Nailer is lightweight at just 5.5 pounds, so it's easy to maneuver while working on a rooftop. Its well-balanced design ensures easy one-handed operation, and the long-lasting non-slip rubber-grip keeps you comfortable and in control. This is a factory reconditioned tool with Hitachi's full one year warranty. This tool is a C grade reconditioned tool direct from Hitachi. They have minor scratches on the body and canaster.

HIDFAST CARRYING BAG. HOLDS TOOL, MALLET, MULTIPLE BOXES OF FASTENERS AND ACCESSORIES.

Fasco I-Clip for InvisiDeck Hidden Scrail System. Use with Scrail SCPS413FPFCB fastener for the installation of high end decks. 900 I-Clips per box covers approximately 500 square feet of deck. Use with Fasco 11356F Tool or Tiger Claw F-5899 •Use with SCPS413FPFCB Scrail fastener •900 I-Clips covers approximately 500 square feet of decking •Cuts installation time in half •Non-Magnetic Annealed Stainless Steel

Use with Fasco 11356F Tool or Tiger Claw F-5899-igun •Use with Fasco I-Clip or •930 Scrail fasteners per box covers approximately 500 square of decking •Fastener needed at every intersection of joist and deck board •InvisiDeck system automatically creates 3/16-Inch space between each deck board Fasco SCPS413FPFCB Hidden Scrail Fastener for installing grooved deck material. Works with Fasco 11365F tool or Tiger Claw F-5899-igun and Fasco I-Clips. 1 box contains 930 scrails that will cover approximately 500 square feet of grooved decking. Fasco SlotCutter can be used to create appropriate groove. Fasteners can be backed out like traditional screws.